Get the latest information about How To Make Tec 9 Full Auto Cold War Reddit in this article, hopefully providing better understanding for you.
If you’re looking to add a little firepower to your Cold War collection, then you’ll need to know how to make a Tec 9 full auto. This iconic weapon was made famous by its use in the Vietnam War, and it’s still a popular choice for collectors and shooters alike. While it can be a bit tricky to convert a Tec 9 to full auto, it’s definitely possible with the right tools and know-how.
To get started, you’ll need the following materials:
How To Make Tec 9 Full Auto Cold War Reddit
- A Tec 9 pistol
- A full auto sear
- A drill press
- A 1/16″ drill bit
- A 3/32″ drill bit
- A 1/8″ drill bit
- A 5/32″ drill bit
- A set of punches
- A hammer
- A screwdriver
- A pair of pliers
- A bottle of Gun Scrubber
- A bottle of CLP
Once you have all of your materials gathered, you can begin the conversion process. The first step is to remove the Tec 9’s slide. To do this, simply pull back on the slide stop lever and pull the slide off of the frame. Once the slide is removed, you’ll need to remove the firing pin. To do this, simply push down on the firing pin retainer and pull the firing pin out of the slide.
With the firing pin removed, you can now install the full auto sear. To do this, simply insert the sear into the slot in the frame and secure it with the sear pin. Once the sear is installed, you can reassemble the pistol. Simply insert the slide onto the frame and push it forward until it locks into place. Then, replace the firing pin and slide stop lever.
Your Tec 9 is now converted to full auto. However, before you can fire it, you’ll need to adjust the sear to ensure that it’s properly timed. To do this, simply fire a few rounds and observe the way the gun cycles. If the gun fires too quickly, then you’ll need to adjust the sear so that it engages the trigger later. If the gun fires too slowly, then you’ll need to adjust the sear so that it engages the trigger sooner.
Once you’ve adjusted the sear, your Tec 9 is ready to fire. Simply load a magazine into the gun and pull the trigger. The gun will fire in full auto until the magazine is empty.
Tips for Converting a Tec 9 to Full Auto
Here are a few tips to help you convert a Tec 9 to full auto safely and successfully:
- Make sure that you have all of the necessary tools and materials before you begin.
- Follow the instructions carefully and do not skip any steps.
- Be patient and take your time. It’s important to ensure that the gun is properly converted.
- If you’re not comfortable converting the gun yourself, then it’s best to have it done by a qualified gunsmith.
FAQ about Converting a Tec 9 to Full Auto
Here are some of the most frequently asked questions about converting a Tec 9 to full auto:
- Is it legal to convert a Tec 9 to full auto?
It is illegal to convert a Tec 9 to full auto under federal law. However, some states may have their own laws regarding the conversion of firearms. - What are the risks of converting a Tec 9 to full auto?
Converting a Tec 9 to full auto can be dangerous if it is not done properly. It is important to ensure that the gun is properly timed and that the sear is properly adjusted. - What are the benefits of converting a Tec 9 to full auto?
Converting a Tec 9 to full auto can increase the gun’s rate of fire and make it more effective in close-quarters combat.
Conclusion
Converting a Tec 9 to full auto can be a fun and rewarding project. However, it is important to remember that it is illegal to convert a Tec 9 to full auto under federal law. Be sure to check your local laws before you begin and make sure that you are comfortable with the risks involved.
If you are interested in learning more about the Tec 9, I recommend checking out the following resources:
- TEC-9 Wikipedia Page
- The Firearm Blog: Tec-9 Full Auto Conversion
- AR15.com: Tec 9 Full Auto Sear Installation
How To Make Tec 9 Full Auto Cold War Reddit
Image: www.rockislandauction.com
You have read How To Make Tec 9 Full Auto Cold War Reddit on our site. Thank you for your visit, and we hope this article is beneficial for you.
