Gain in-depth insights into How To Change A Heating Element On A Whirlpool Dryer, may the information we provide be beneficial for you.
How to Change a Heating Element on a Whirlpool Dryer: A Step-by-Step Guide
As a homeowner, there’s nothing more frustrating than a malfunctioning appliance. When your Whirlpool dryer stops heating, it can be a major inconvenience. But before you call a repairman, there’s one simple fix you can try yourself: replacing the heating element.
In this article, we’ll walk you through the step-by-step process of changing a heating element on a Whirlpool dryer. We’ll also provide some tips and expert advice to help you get the job done right.
What is a Heating Element?
A heating element is a component in a dryer that generates heat to dry clothes. It’s usually located at the back of the dryer, behind the drum. When the dryer is turned on, the heating element heats up, causing the air inside the dryer to circulate and evaporate the moisture from the clothes.
How to Identify a Faulty Heating Element
There are a few signs that may indicate a faulty heating element in your Whirlpool dryer:
- The dryer doesn’t heat up at all
- The dryer takes a long time to dry clothes
- The clothes come out of the dryer damp or wrinkled
- The dryer makes a burning smell
If you’re experiencing any of these problems, it’s important to check the heating element.
Tools You’ll Need
To change a heating element on a Whirlpool dryer, you’ll need the following tools:
- Screwdriver
- Nut driver
- Multimeter
- New heating element
Step-by-Step Instructions
- Unplug the dryer and disconnect the gas line. Before you start working on the dryer, it’s important to unplug it from the power outlet and disconnect the gas line. This will prevent any accidents from happening.
- Remove the back panel of the dryer. Once the dryer is unplugged and disconnected from the gas line, you can remove the back panel. To do this, simply unscrew the screws that are holding it in place.
- Locate the heating element. The heating element is usually located at the back of the dryer, behind the drum. It’s a large, metal coil with two terminals.
- Disconnect the wires from the heating element. Using a screwdriver, disconnect the wires from the terminals on the heating element.
- Remove the heating element. Once the wires are disconnected, you can remove the heating element from the dryer. To do this, simply unscrew the nuts that are holding it in place.
- Inspect the heating element. Once the heating element is removed, you can inspect it for damage. If the element is burned out or damaged, it will need to be replaced.
- Install the new heating element. To install the new heating element, simply reverse the steps above. First, place the new heating element in the dryer and secure it with the nuts. Then, connect the wires to the terminals on the heating element.
- Reattach the back panel of the dryer. Once the new heating element is installed, you can reattach the back panel of the dryer. To do this, simply screw the back panel back into place.
- Plug in the dryer and reconnect the gas line. Once the back panel is reattached, you can plug in the dryer and reconnect the gas line.
- Test the dryer. To test the dryer, simply turn it on and put a load of wet clothes in it. The dryer should heat up and dry the clothes in a few minutes.
Tips and Expert Advice
- If you’re not comfortable changing the heating element yourself, you can always call a qualified appliance repair technician to do it for you.
- When you’re buying a new heating element, make sure to get one that is the same size and wattage as the old one.
- If the heating element is burned out, it’s important to find out why. There may be another problem with the dryer that caused the heating element to burn out.
- If you have any questions or concerns about changing the heating element on your Whirlpool dryer, don’t hesitate to contact a qualified appliance repair technician.
FAQs
- How long does it take to change a heating element on a Whirlpool dryer?
It usually takes about 30 minutes to change a heating element on a Whirlpool dryer.
- How much does it cost to replace a heating element on a Whirlpool dryer?
The cost of replacing a heating element on a Whirlpool dryer will vary depending on the model of the dryer and the cost of the new heating element. However, you can expect to pay between $50 and $100 for the new heating element and another $50 to $100 for labor if you hire a qualified appliance repair technician to do the job for you.
- Can I change the heating element on my Whirlpool dryer myself?
Yes, you can change the heating element on your Whirlpool dryer yourself if you’re comfortable working on appliances. However, if you’re not comfortable doing so, it’s best to call a qualified appliance repair technician.
Conclusion
Changing a heating element on a Whirlpool dryer is a relatively simple repair that you can do yourself. By following the steps in this article, you can save yourself the cost of hiring a qualified appliance repair technician.
If you have any questions or concerns about changing the heating element on your Whirlpool dryer, don’t hesitate to contact a qualified appliance repair technician.
Image: www.youtube.com
Thank you for visiting our website and taking the time to read How To Change A Heating Element On A Whirlpool Dryer. We hope you find benefits from this article.
