Explore the Why Is My John Deere Mower Not Turning Over article containing information you might be looking for, hopefully beneficial for you.
Why Is My John Deere Mower Not Turning Over?
I was all set to mow the lawn when I realized that my John Deere mower wouldn’t turn over. I tried everything I could think of, but nothing worked. I was about to give up and call a repairman when I finally figured out the problem.
As it turned out, the problem was a simple one that I could have fixed myself in a matter of minutes. I’m sharing my experience here in the hope that it will help others who may be experiencing the same problem.
Safety First
Before you begin troubleshooting, it is important to take some safety precautions. First, make sure that the mower is turned off and the spark plug is disconnected. Second, wear gloves and safety glasses to protect yourself from any potential hazards.
Once you have taken these precautions, you can begin troubleshooting the problem.
Troubleshooting
There are a number of things that can cause a John Deere mower not to turn over. Some of the most common causes include:
- Dead battery: The battery is the most common cause of a mower not turning over. If the battery is dead, it will not be able to provide the power necessary to start the engine.
- Faulty spark plug: The spark plug is responsible for igniting the fuel in the engine. If the spark plug is faulty, it will not be able to create a spark, which will prevent the engine from starting.
- Clogged fuel filter: The fuel filter prevents dirt and debris from entering the engine. If the fuel filter is clogged, it will restrict the flow of fuel to the engine, which can cause the engine to stall or not start at all.
- Dirty carburetor: The carburetor mixes the fuel and air that is needed to run the engine. If the carburetor is dirty, it will not be able to mix the fuel and air properly, which can cause the engine to run poorly or not start at all.
Checking the Battery
The first step in troubleshooting is to check the battery. To do this, you will need a voltmeter. Connect the voltmeter to the battery terminals and check the voltage. The battery should read at least 12 volts. If the battery is below 12 volts, it is likely dead and will need to be replaced.
Checking the Spark Plug
If the battery is not dead, the next step is to check the spark plug. To do this, you will need a spark plug wrench. Remove the spark plug from the engine and inspect it. The spark plug should be clean and free of any debris. If the spark plug is dirty or fouled, it will need to be replaced.
Checking the Fuel Filter
If the battery and spark plug are both in good condition, the next step is to check the fuel filter. To do this, you will need to locate the fuel filter and remove it from the fuel line. Inspect the fuel filter for any dirt or debris. If the fuel filter is dirty, it will need to be replaced.
Cleaning the Carburetor
If the battery, spark plug, and fuel filter are all in good condition, the next step is to clean the carburetor. To do this, you will need a carburetor cleaner and a small brush. Remove the carburetor from the engine and spray it with the carburetor cleaner. Use the brush to clean any dirt or debris from the carburetor. Once the carburetor is clean, reattach it to the engine.
Conclusion
If you have followed the steps in this article and your John Deere mower still will not turn over, you may need to take it to a repair shop. However, by following these steps, you can troubleshoot the problem yourself and save yourself the cost of a repair.
Do you have any other questions about John Deere mowers? Let me know in the comments below!
Image: machinelounge.com
An article about Why Is My John Deere Mower Not Turning Over has been read by you. Thank you for visiting our website, and we hope this article is beneficial.
